Tag Archives: tongs

New for old

Last Sunday I went to see my mate Rod at the top of Bingley Five Rise, a staircase of locks on the Leeds Liverpool canal which is celebrating its 200th anniversary of fully opening.  Rod’s been blacksmithing for quite a while and has some great stories.  He was there with his bucket forge and a great improvement over his usual foot pump blower, a customised VW heater fan and a car battery.  Orders to Mr David Wadsworth.

No working pictures, sorry, I was in old fashioned mode with a swill basket of iron, so a camera was a bit if a no no.


As a change from the hooks and candle holders he’d been knocking out all morning, I’d taken him some real work, a stock knife to hook and a pair of tongs to adjust. I’ve had this clog maker’s knife for some years, puzzled by how it was supposed to be mounted with the 3/4 inch thread on the end in place of a hook. With several heats in the tiny forge Rod transformed the thread into a regular hook. I sharpened the hollower, as it is called, and gave it a test run on some ash.  Some adjustments needed, bit of slimming on the neck of the hook, and investigating why the edge leaves one if the raggedest finishes I’ve made for a long time.

img_1674

I’ve turned a new carving mallet, my old one was starting to delaminate. I’m not used to exotic timber so I’ve no idea what this is, but it’s got a good weight to it.  I’m using the mallet rather a lot, making the decorations on my new carved oak grain ark.


The tongs are now adjusted to close on finer diameters like nails.

More coppicing tomorrow.

Thawsday

The thaw has started in Strid Wood, with the snow on the trees dripping into the snow.  It was also dripping off the tarp yesterday, mainly due to the roaring fire I got going in the afternoon.

In the morning I finished off moving all the stray Spring felled timber back to the bodgery.  I’ve been using two very useful tools for this.  First up the log tongs.  This is great.  The two dogs bite into the logs and then you can haul them into the trailer, mostly without touching them and keeping your gloves drier. The logs look rough, but they are fine inside.

If the logs are frozen together (and few weren’t!) I’ve been using this home-made pickeroon.

This was originally a short-handled job, not sure of its intended purpose, but with a long handle it’s great for freeing logs and digging the spike end into  log also allows rolling and pulling without bending – great!

While I was back in this part of the woods I surveyed my thinning work last year, you may be able to see all the stumps as larger black lumps.

And this is where I’m due to thin next.

There’s a lot of small stuff in there to fell.

Meanwhile back at the bodgery I spent the afternoon making rolling pin blanks and animals:

They are supposed to be foxes, the front one is OK.  I’ve since modified the big one into a bear, the rather angular one awaits further attention from the knife.

I also had a look round at tracks – I like the ‘shadow’ of the wing in this one:

When I got home there was an interesting eBay delivery:

Guess what’s inside.  See next post.